Products using the superb low noise, high sensitivity Primo EM172 capsule
Matched pair perfect for Stereo Recording High sensitivity omni-directonal low noise microphone Balanced XLR output Phantom power 12-48 volts Black aluminium housing Balancing electronics inside the XLR plug Also available as Single and Four matched for surround and ambisonic recording
High sensitivity omni-directonal low noise microphone Balanced XLR output Phantom power 12-48 volts Black aluminium housing Balancing electronics inside the XLR plug Available Matched Stereo pairs and Four Matched for surround and ambisonic recording Primo EM172 Data sheet
A clip-on lavalier microphone using the superb low noise, high sensitivity Primo EM172 capsule. Rugged black anodized aluminium enclosure, metal grid, tough metal clip and 1.1 metre of thin flexible screened cable. Cable is terminated with a 3.5 mm stereo plug. A Stereo Clippy is also available here. Could be connected with FL025 or FL026...
A clip-on lavalier microphone using the superb low noise, high sensitivity Primo EM172 capsule. Rugged black anodized aluminium enclosure, metal grid, tough metal clip and 1.1 metre of thin flexible screened cable. Cable is terminated with a gold 3.5 mm stereo plug. A Mono Clippy is also available. Primo EM 172 Z-1 Data sheet
A foam windshield for our Clippy microphones The windshield is slightly hollow with a tighter neck so it stretches over the microphone and stays firmly in place It also covers the side slots on the mic For better wind protection see our small and medium 10 mm windshields here
Only one size is available. Alternative for Large windshiled. Microphone Windshield for 10 mm capsules, to help reduce wind noise. High quality foam, offer better protection for Clippy Mics Suitable for Primo EM172, EM173, EM184. Suitable for Clippy EM172 Microphone and Clippy XLR EM172 Microphone.
Spare metal clip for Clippy microphones, tough metal alligator clip with a sprung plastic holder to accept the microphone.
A beautiful aluminium enclosure for 10 mm capsules like the Primo EM172, 173 and 184. The top cover screws onto the body and has a metal grill for protecting the capsule. There are slots below the capsule making it suitable for cardiod use.
High-level protection against wind noise for lavalier mics in the open air. Helps reduce microphone noise and clothes rustle. Elastic opening fits over our Clippy Microphones. Available in Grey and Black. Rycote DIY Windjammer Kit, Black & Grey are also available.
High sensitivity omni-directonal low noise microphones Balanced XLR outputs Phantom power 12-48 volts Black aluminium housing Balancing electronics inside the XLR plug Also available as single microphones and matched stereo pairs Primo EM 172 Z-1 Data sheet
Avnailable in Two lengths, 15 cm and 200 cm 3.5 mm stereo plug to 2 x 3.5 mm mono sockets For connecting 2 mono sources to left and right inputs of a recorder or camera Can be used in our Mono Clippy microphone
A complete working stereo microphone module ready to build in to a housing or enclosure. Complete working microphone ready to plug in No soldering required Ideal for binaral use Does require capsule and cable to be supported 1.5 metre screened cable Metal bodied, gold plated, stereo plug Single version of this module is available here
Monacor WS-40 Microphone windshield Black For microphones sized 21-26 mm Dimensions: 39 mm x 55 mm Suitable for Rugged Mount EM172 Microphone, FC081.
Primo EM172 capsule in a rugged nylon panel mount enclosure Designed for outside use in monitoring applications. Monacor Windshield and Rycote Windjammer kit are available. Primo EM 172 Z-1 Data sheet The microphone is not waterproof but it is well protected from physical damage.
Kit Includes: Rycote Black Mini Windjammer Fur Rycote Red Lining Velcro strips Made in the UK Longer dark grey fur is also available. Make your own windjammer. You need a sewing machine or needle and thread.
Includes: Dark Grey Fur (darker than FC071) Rycote Red Lining Velcro Black Short Fur is also available. Made in the UK Make your own custom windjammer. You'll need a sewing machine, or needle and thread.
Supplier: Rycote Microphone Windshields Small and Large, two sizes are available. Suitable for Clippy Microphones.
Grommet and Strain Relief for Clippy Enclosure.