No products
Clippy and Pluggy Microphones
- Clippy and Pluggy Microphones
- FEL MicBooster Phantom Powered Microphone Preamplifiers
- FEL 3.5 Series Microphone Preamplifiers
- Microphone Capsules
- Modules with Primo Microphone Capsules
- Ultrasonic Microphones
- Microphone Windshields
- Microphone Holders
- Audio Connectors
- Audio Cable
- Leads and Adaptors
- Phono Cables and Adaptors
- DIY / Maker
- Clearance and Open Box
Microphones using the superb omni and cardioid Primo capsules
Clippy and Pluggy Microphones There are 28 products.
-
Clippy XLR EM272Z1 Matched Stereo Pair
Matched pair of Clippy XLR EM272Z1 microphones, perfect for Stereo Recording High sensitivity omni-directional low noise Balanced XLR output Requires Phantom power 12-48 volts Also available as a Mono mic and Four matched mics MicBooster · Suburban Evening Birds, Clippy EM172 XLR
£ 104.95In Stock -
Clippy XLR EM272Z1 Microphone, Mono
Primo EM272Z1, high sensitivity omni-directional low noise microphone Balanced XLR output Phantom power 12-48 volts Black aluminium housing Balancing electronics inside the XLR plug Available as matched Stereo pairs and Four matched for surround and ambisonic recording
£ 49.40In Stock -
Clippy Foam Windshield (single)
A foam Windshield for our Clippy Microphones Suitable for use under the Clippy Rycote Windjammer The Windshield is slightly hollow with a tighter neck so it stretches over the microphone and stays firmly in place It also covers the side slots on the mic Dimensions: Overall length 26 mm Overall diameter 23 mm Bore diameter 9 mm Bore depth 20.5 mm
£ 1.90In Stock -
Spare Clip for Clippy Microphones
Spare clips for our Clippy Microphones. Two types are available. Please ensure you choose the correct clip, these are not interchangeable. B. New style: With sprung metal holder, Sutable for Mono Clippy, Smart Clippy Mono Omni Microphone, Clippy XLR Matched, and Pluggy Mini A. Old style: Tough metal alligator clip with a sprung plastic holder to...
£ 4.00In Stock -
4 Matched Clippy XLR EM272Z1 Microphones
Does not include any accessories. High sensitivity omni-directonal low noise microphones 4 Sensitivity matched Primo EM272Z1 capsules for surround or ambisonic recording Balanced XLR outputs Phantom power 12-48 volts Black aluminium housing Balancing electronics built inside the XLR plug Also available as single microphones and matched stereo pairs
£ 216.00In Stock -
Rycote Clippy Foam Windshield (single)
A foam windshield made just for Clippy MicrophonesAvailable in 2 sizes. Suitable for Clippy Microphones Best Quality Foam Windshields Made for us by Rycote in the UK Small size is suitable for use under the Clippy Rycote Windjammer.
£ 3.05In Stock -
Clippy XLR EM264Y, Mono, Stereo, Quad
Clippy EM264 interference.Please read all descriptions before purchasing.We have found that the Primo EM264Y capsule is unusually vulnerable to electro magnetic interference, particularly mains hum and lower frequency buzzes. They are good for outdoor use by nature recordists but indoors some customers have had problems. The interference is very variable.
£ 117.90In Stock -
Clippy EM272Z1 Mono Microphone
Does not include any accessories. A clip-on lavalier microphone using the superb low noise, high sensitivity Primo EM272 omni capsule Rugged black anodized aluminium enclosure, metal grid, tough metal clip and 1 metre of thin flexible screened cable To use with a smartphone you will need a TRS to TRRS Microphone Adapter or Smart Clippy. Primo EM272Z1...
£ 31.30In Stock -
Clippy EM272Z1 Stereo Microphone
Does not include any accessories. A pair of clip-on lavalier microphones using the superb low noise, high sensitivity Primo EM272Z1 capsules Rugged black anodised aluminium enclosure, metal grid and tough metal clip Each microphone has 110 cm of thin flexible screened cable. Maximum mic spacing 210 cm Fitted with a straight or right angled 3.5 mm gold...
£ 70.95In Stock -
Clippy Cardioid EM264 Microphone, Mono
Clippy EM264 interference. Please read all description before purchasing. We have found that the EM264 capsule is unusually vulnerable to electro magnetic interference, particularly mains hum and lower frequency buzzes. They are good for outdoor use by nature recordists but indoors some customers have had problems. The interference is very variable.
£ 36.60In Stock -
Clippy Stereo EM264Y
Clippy EM264 interference. Please read all description before purchasing. We have found that the EM264 capsule is unusually vulnerable to electro magnetic interference, particularly mains hum and lower frequency buzzes. They are good for outdoor use by nature recordists but indoors some customers have had problems. The interference is very variable.
£ 84.30 -
Smart Clippy EM272Z1 Mono Microphone
A clip-on lavalier microphone using the superb low noise, high sensitivity Primo EM272Z1 capsule. Includes Clippy Spare Clip:Type B Rugged black anodized aluminium enclosure, metal grid, tough metal clip and 1 metre of thin flexible screened cable. Gold plated TRRS plug to use with a smart phone. Primo EM272Z1 Data sheet
£ 31.30In Stock -
Pluggy XLR Primo EM272Z1 Microphone
High sensitivity Primo EM272Z1 omni-directional low noise microphone Phantom power 12-48 volts Microphone and electronics inside the XLR plug Available as matched Stereo pairs Smart Mini Pluggy available A Pluggy Holder is available. MicBooster · Garden1. Pluggy EM172 (Left). MKH 8020 (Right) Primo EM272 data sheet
£ 46.75In Stock -
Rycote Windjammer for Clippy Mic (single)
High Level Wind protection for the Clippy and Mini Pluggy microphones. The Clippy Windjammer is designed to fit over a foam windshield: FC075 Rycote Windshield, Small size or FC077 Clippy Windshield The foam windshield adds wind protection and helps the Windjammer stay firmly in place. Made in the UK by Rycote
£ 13.90In Stock -
Rycote Clippy Lyre Holder (single)
Suitable for DIY A holder for the Clippy microphone 3 mm 1/8" mounting hole Made from almost indestructible thermoplastic Made by Rycote in the UK FC155 & FC156 are available Available with or without a Screw Kit consisting of: 1 x Black, 16mm M3 Hex Head Screw 1 x Plain Washer 1 x M3 Nyloc locking nut
£ 3.95In Stock -
Clippy Mic Enclosure (Type B)
A beautiful aluminium enclosure for 10 mm capsules. The top cover screws onto the body and has a metal grill to protecting the capsule. There are slots below the capsule making it suitable for cardioid use. Clip available separately
£ 4.80In Stock -
Clippy Lyre Adapter (single)
An adapter to connect a Clippy Lyre to a 3/8" microphone stand • 3/8" metal insert • Requires tools to assemble, see below What's "in the box": • 1x Adapter • 1x M3 16mm button head machine screw • 1x M3 Nylock nut • 1x M3 washer
£ 4.65In Stock -
Clippy Lyre Stand Mount
Rycote Lyre Mount with 3/8" female thread A shock mount holder for the Clippy microphone Made from almost indestructible thermoplastic Clips firmly around the base of the Clippy, a Windjammer or Foam Windshield can still be used Metal insert for 3/8" microphone stands
£ 8.60In Stock
