NEUTRIK BXX-0 Black Bushing Boot, for XX type XLR Quantity discounts available as below, UK sales only.
Black Heatshrink SleevingCorrect size for Mogami 2697 balanced cable3.2 mm inside diameter unshrunk1.6 mm inside diameter shrunk20 cm length
1.6 mm diameter unshrunk 2:1 shrink ratio Black 20 cm length Shrink temperature 70°C to 110°C Suitable for the cores of our Mogami cables Useful for DIY.
Useful cover to keep dust, dirt and splashes out of unused XLR sockets. Soft rubber push fits in and out.
Useful cover to keep dust, dirt and splashes out of unused XLR sockets. Soft rubber push fits in and out.
Make your own in ear binaural microphones Durable and washable With case, pouch and mixing spatula Moulds to the contours of your ear in 10 minutes Set microphone capsule into the compound We encourage you to follow the instructions carefully and please never push anything deep into your ear. Please read the instructions fully.
A pair of Moulded Silicone Ears for Binauaral Head Recording. High quality smooth silicone, free of bubbles and other imperfections. Ear canal suitable for Primo EM182, 272, 273, 264, 283 and other 10 mm microphone capsules. No holes.
Self adhesive electret capsule covers To reduce the ingress of moisture, dust and dirt into microphone capsules Perfect size for Primo EM272 and EM273 2 types with different protection levels Please note these vents provide degrees of water resistance, they do not make the capsule waterproof.
Ultra low noise. High Sensitivity Wide Dynamic range. Omni Directional 5 cm black and red leads soldered to the capsule We heatsink the capsule before soldering so it is never over-heated. This is replacement for the Primo EM172 with wires Ideal for recording nature sounds, backgrounds and ambience. Read more about the EM272 here. Primo EM272 Data Sheet
Please note the Primo EM184 capsule is no longer manufactured. The Primo EM264Y with wires are available 5 cm black and red leads soldered to the capsule. We heatsink the capsule before soldering so it is never over-heated. Primo EM172 with wire are available (Low stock) Primo EM184 Clippy Stereo is available (last one)
Knowles MEMS Microphone with good ultrasonic response 20Hz to 10KHz +/- 2 dB 10kHz to 80kHz +/- 10 dB Miniature surface mount device This microphone is now available pre-soldered to a small PCB for easier use, please see FC089 Ultrasonic Mic Board Knowles Data Sheet This is not an easy item to use, it is very small and you need to solder carefully.
6 mm inside diameter Braided Sleeving Useful for covering cable where the protection is required Useful for keeping bunches of cables together Sold by the metre
Black rubber sleeve tube Suitable for 10 mm microphone capsules eg: Primo EM272, EM273, EM182, EM283, EM264Y.
Rugged nylon panel mount enclosure for EM272, EM273, EM264Y, EM182, EM283 and other 10 mm microphone capsules. Include Primo E100 Holder Monacor Windscreen is available.
10 mm inside diameter Braided Sleeving Useful for covering cable where the protection is required Useful for keeping bunches of cables together Sold by the metre
3.5mm stereo socket with plastic cover Nickel plated contacts Cable Mount
3.5mm Right Angle Plug - Black Body Gold Contacts. Neutrik 3.5 mm audio plug with chuck and bushing, black housing and gold contacts. Suitable for cables 2-4.5 mm diameter. Made by Neutrik, part number NTP3RCB We believe this is the best quality stereo 3.5mm plug on the market. It has a chuck type cable retention and strain relief.
3.5 mm jack, cable mounted 3-pole, black metal shell, with gold plated contacts. Made by Rean, a Neutrik brand. 3.5 mm jack, 3-pole, black metal handle, gold plated contacts. Maximum cable diameter 4.3 mm. This socket can also be mounted on a thin panel. NYS240BG REAN by Neutrik.