No products
Clearance and Open Box
- Clippy and Pluggy Microphones
- FEL MicBooster Phantom Powered Microphone Preamplifiers
- FEL 3.5 Series Microphone Preamplifiers
- Primo Microphone Modules
- Primo Microphone Capsules
- Ultrasonic Microphones
- Microphone Windshields
- Microphone Holders
- Audio Connectors
- Audio Cable
- Leads and Adaptors
- Phono Cables and Adaptors
- DIY / Maker
- Clearance and Open Box
Clearance and Open Box There are 22 products.
-
Female XLR Cover/Cap
Useful cover to keep dust, dirt and splashes out of unused XLR sockets. Soft rubber push fits in and out.
£ 0.25In Stock -
Male XLR Cover/Cap
Useful cover to keep dust, dirt and splashes out of unused XLR sockets. Soft rubber push fits in and out.
£ 0.25In Stock -
NEUTRIK BXX-0, Black Bushing
NEUTRIK BXX-0 Black Bushing Boot, for XX type XLR Quantity discounts available as below, UK sales only.
£ 0.10In Stock -
-
Jack Stereo 6.35 mm
6.35 mm Male Stereo Jack 6.35 mm Female Stereo Jack Length: 5 m Weight: 143 g Current Rating 5A Made in Germany
£ 5.75In Stock -
Pre-cut Figure of 8 Screened Cables
Pre-cut 40 cm & 140 cm Figure of 8 Screened Cable Please see full detail
£ 1.40In Stock -
NEUTRIK XXR-0 XLR CODING RING Black
Black coding rings for Neitrik XX series XLR cable connectors The ring can be changed without unsoldering insert
£ 0.04In Stock -
Canon AVC-DC400ST
This Canon AVC-DC400ST Stereo AV Cable is compatible with the Canon EOS-1D X, 1D Mark IV, 5D Mark III, 6D, 7D, 60D, Rebel T4i, Rebel T3i, Rebel T2i, and EOS M cameras. The cable has 3 RCA plugs, 2 for stereo audio and one for video.
£ 6.00In Stock -
3.5mm Stereo Jack Plug to 2 x Stereo Jack...
3.5mm Stereo Jack Plug to 2 x Stereo Jack Plugs Lead Moulded plugs & strain reliefs Length: 1 M
£ 4.00In Stock -
Foam Windshield (single)
Not the finest quality Good enough for protection Black Foam Windshield Can be used with any 10 mm microphone capsules or over the Clippy enclosure Approximate Dimension: Overall length 25.0 mm Overall diameter 23.0 mm Bore diameter 7 mm Bore depth 22.0 mm Please note we do not accept any returns for refunds for this products.
£ 0.42Out of stock -
Rycote 104403 Reporter Mic Foam
Charcoal Grey Foam Windshield Approximate Dimension: Overall length 75 mm Overall widest diameter 60 mm Overall narrowest diameter 50 mm Internal diameter 30 mm Internal depth 60 mm Weight 3.66g Rycote 104403 Reporter Mic Foam
£ 6.60Out of stock -
UAX220-Mic Professional USB stereo interface
New and unused Comes with a storage bag Bought for a project but not required Made by Digigram Full description Digigram
£ 150.00In Stock -
Additional payment for Postage
Please note: Use this service only under our instructions.
£ 0.10In Stock -
Rycote Clippy Lyre Holder holder for front
Suitable for DIY A holder for the Clippy microphone enclosure front, Size: 11.5–12.5 mm Made from almost indestructible thermoplastic 3 mm (M3) mounting hole Clips firmly around the base of the mic Compatible with Clippy Windjammer Made by Rycote in the UK FC154c includes Steel BZP: 1x Steel Nyloc Nut 2x M3 Plain Nuts 1x 16mm M3 slotted Screw
£ 4.45Out of stock -
Pre-cut 2 metres Mogami Balanced Cable
Pre-cut 200cm Mogami Balanced Cable Please see full details MOGAMI 2697 Miniature balanced lavalier microphone cable Two cores and screen, suitable for unbalanced stereo flexible PVC jacket Easy to strip and solder Excellent quality 2.5 mm diameter Pre-Cut Figure of 8 cableis MOGAMI 2697 DATASHEET
£ 3.25In Stock -
Ground Loop Isolator, 3.5 mm Jack and Plug...
Ideal for connecting portable devices including smartphones, tablets and laptops to external sound gear Designed to connect the stereo output to a single line level input channel In-line dual isolation transformer eliminates hum and other noise caused by ground loops, while providing protection to the portable device Input: 1x 3.5mm stereo jack plug...
£ 9.00In Stock -
NC3FXX-HD-D
Heavy duty female 3 pole XLR cable connector for outdoor use. All metal design is dust and water protected to IP67 when mated with XX-HD cable connectors or MPR-HD chassis connectors. Gold contacts are standard. A neoprene rubber sealing-jacket protects the shell and latch mechanism from ingress of dirt and moisture into the connector body. Gives...
£ 6.45In Stock -
NC3MXX-HD-D
Dust and water ingress sealing: - IP67 in combination with HD cable connector NC3MXX-HD* - IP67 in combination with HD chassis connector NC3MPR-HD Rubber sealing jacket protects against water ingress and mechanical shock Gold contacts
£ 6.45In Stock
