Clippy EM272 Stereo with Newtrik Right Angle Plug
search
  • Clippy EM272 Stereo with Newtrik Right Angle Plug
  • Clippy Microphone with Type B Clip
  • Clippy with Type A Clip & Enclosure
  • Clippy EM272 Stereo with Right Angle Plug

Clippy EM272 Stereo Microphone

£96.72
VAT included
  • A pair of clip-on lavalier microphones using the superb low noise, high sensitivity Primo EM272Z1 capsules
  • Rugged black anodised aluminium enclosure, metal grid and tough metal clip
  • Each microphone has 110 cm of thin flexible screened cable. Maximum mic spacing 210 cm
  • Fitted with a straight or right angled 3.5 mm gold plated plug

Primo EM272Z1 Data Sheet    

Manual

Plug Type: Right Angle
Microphone: EM272Z1
Quantity
In Stock

The Stereo Clippy EM272 microphone is available with 2 different 3.5 mm plugs:

  • Straight - a plastic plug with gold plated contacts.  The plug is moulded onto the cable making it almost impossible to damage.
  • Right Angled - a metal plug with gold plated contacts made by Neutrik.

A pair of clip-on lavalier microphones using the superb low noise, high sensitivity Primo EM272 capsules.

This is a complete ready to use lavalier microphone using the low noise and high sensitivity Primo EM272 omni directional capsules.  The microphone can be plugged directly into the microphone socket of most portable recorders and cameras.

The EM272 capsule is used extensively for nature recording, atmospheres and ASMR where it's low noise and high sensitivity make it really shine.

What's in the box:

  • 1 x Clippy Stereo Microphone with 3.5 mm plug and Clips

There is a small family of Clippy EM272Z1 microphones as below:

With 3.5 mm plugs, requiring Plug-in Power:

  • Mono Clippy - with straight stereo moulded plug, the mic signal is fed to both left and right channels
  • Stereo Clippy - with right angle stereo metal plug - a Matched Pair of Clippy mics
  • Stere Module - with straight stereo moulded plug - a Matched Pair of Clippy mics 
  • Stere Module - with right angle stereo metal plug moulded - a Matched Pair of Clippy mics 
  • Smart Mono Clippy - with straight TRRS moulded plug suitable for use with mobile phones and some laptop computers.

With XLR plugs and requiring phantom power:

  • Mono - a single mono Clippy microphone with a 3 pin male XLR
  • Stereo - pair of matched XLR Clippy mics, each with a 3 pin male XLR
  • Quad - 4 matched XLR Clippy mics, each with a 3 pin male XLR

"I was blown away by the quality of the stereo pair. They're awesome. I'll be recommending them widely." A.H Essex

"Just got around to testing your Clippy EM172 mic - the claim it is 4db more sensitive than the Rode (Rode smartLav) does seem to hold up - I like it a lot. It's got just that extra boost I need. I've ordered another"  LC, London
"First impression is how quiet the mics are." A.H North Yorkshire
FC042

You might also like