Primo EM172 to Nickel plated 3.5mm plug with 1.5 metre cable Primo EM272Z-1 to Gold Plated 3.5 mm plug with 1.5m cable Requires capsule and cable to be supported : FC013, FC014. and FC032 are available Can be used with Rode VXLR+ Single microphone can be used with TRRS cable or Y adapter Ready to plug in, no soldering Primo EM272Z1 datasheet Primo...
Primo EM264Y cardioid capsule Low noise and high sensitivity 3.5 mm stereo gold plated plug Requires capsule and cable to be supported Ready to plug in, no soldering 1 metre flexible screened cable Can be used with Rode VXLR+ Single microphone can be used with TRRS cable or Y adapter Stereo Module
Complete working microphone ready to plug in No soldering required Ideal for binaural use Does require capsule and cable to be supported Sensitivity matched Primo EM264Y Metal bodied, gold plated, stereo plug Mono Module DIY Kit is available.
A beautiful aluminium enclosure for 10 mm capsules. The top cover screws onto the body and has a metal grill to protecting the capsule. There are slots below the capsule making it suitable for cardioid use. Clip available separately
Heavy duty female 3 pole XLR cable connector for outdoor use. All metal design is dust and water protected to IP67 when mated with XX-HD cable connectors or MPR-HD chassis connectors. Gold contacts are standard. A neoprene rubber sealing-jacket protects the shell and latch mechanism from ingress of dirt and moisture into the connector body. Gives...
Dust and water ingress sealing: - IP67 in combination with HD cable connector NC3MXX-HD* - IP67 in combination with HD chassis connector NC3MPR-HD Rubber sealing jacket protects against water ingress and mechanical shock Gold contacts
New Design Rycote Lyre Mount with 3/8" female thread A shock mount holder for the Clippy microphone Made from almost indestructible thermoplastic Clips firmly around the base of the Clippy, a Windjammer or Foam Windshield can still be used Metal insert for 3/8" microphone stands
5/8"F to 3/8"M Microphone Thread Adapter Enables the Clippy Lyre Mount to be used on a stand etc with 5/8" male thread Please note, this is the thread adapter only, the Clippy Lyre mount is not included.
6.35mm (1/4") Stereo Jack Socket to 3.5mm Stereo Jack Plug Adaptor
Cardioid Electret capsule without FET Sensitivity -42±3dB (1KHz,0dB=1v/Pa) Operating Voltage: 1.5V Impedance: ≤2.2KΩ Directivity: Unidirectional Sensitivity reduction: ≤ 3dB Vs=1.5 to 1.0V S/N ratio: ≥65dB Maximum input sound level: 135 dB SPL
Professional quality miniature unswitched 3.5mm stereo jack socket in horizontal mounting style. Black colour ABS housing material Crimped PCB legs Made in Hong Kong
3 pole 3.5 mm audio plug Solder termination Chuck type strain relief Bushing Nickel housing and contacts The only right-angled metal bodied 3.5 mm jack plug with chuck type strain relief for secure cable retention. Accepts cables from 2.0 to 4.5 mm.
A clip-on lavalier microphone using the superb low noise, high sensitivity Primo EM272 omni capsule Rugged black anodized aluminium enclosure, metal grid, tough metal clip and 1 metre of thin flexible screened cable To use with a smartphone you can use a TRS to TRRS Microphone Adapter or a Smart Clippy. For custom cable lengths please see here
Gold plated, right angle 3-pole jack plug Pure copper conductors Cable not Screened Connector Type A: 3.5mm Stereo Jack Plug Connector to Connector: 3.5mm Stereo Phone Plug to Free End Connector Type B: Free End Cable Length - Imperial: 3.28ft Cable Length - Metric: 1m Jacket Colour: Black
3.5 mm stereo straight plug to straight plug 3 meters Figure of 8 style cable Nickel plated plugs
PAPST 405 F, 5 V dc, DC Axial Fan 40 x 40 x 10mm 140mA 0.7W
KD0506PTS2 5 VDC 0.33 AMP 1.2 Watts 3800 PRM 17.6 CFM 0.15 Inch-H 2 O 31 dBA 60 g 60x60x25 mm
Spring loaded microphone clamp 5/8" metal thread 3/8" metal internal thread adapter included Colour: Black Suitable for microphones with diameter from 13 to 28mm Style: Spring Loaded Product Dimensions: 15 x 25 x 14 cm Weight: 68 g Suitable for XLR EM272 Pluggy