No products
DIY / Maker
- Clippy and Pluggy Microphones
- FEL MicBooster Phantom Powered Microphone Preamplifiers
- FEL 3.5 Series Microphone Preamplifiers
- Microphone Capsules
- Modules with Primo Microphone Capsules
- Ultrasonic Microphones
- Microphone Windshields
- Microphone Holders
- Audio Connectors
- Audio Cable
- Leads and Adaptors
- Phono Cables and Adaptors
- DIY / Maker
- Clearance and Open Box
DIY / Maker There are 73 products.
-
Wired Primo EM264Y Cardioid Capsule
Low noise | High Sensitivity Wide Dynamic range | Cardioid 5 cm black and red leads soldered to the capsule This EM264Y is a replacement for the EM184 High quality electret condenser mic capsule, its cardioid pick up pattern, low noise and high sensitivity make it ideal for reverberant spaces or anywhere you need to reject a particular source of noise....
£ 14.95In Stock -
Solder, Lead Free, 0.7mm diameter, Per metre
This is the lead free solder we have used for many years for all our hand soldering. It is the nearest one we we know to good leaded solder. Top quality and easy to use Excellent solder joint reliability Superior joint strength Excellent thermal & Mechanical fatigue resistance Suitable for no-clean process Melting Point: 217~219 C Diameter: 0.7 mm...
£ 1.90In Stock -
Clear Heatshrink Tubing 9.5mm diameter
9.5 mm unshrunk diameter 4.75 mm shrunk diameter Correct size for our Neutrik 3.5 mm plugs and socket Shrink ratio 2:1 Shrink temperature 70°C min. Full recovery temperature 105°C min. Halogen-free polyolefin Clear transparent normal wall for easy viewing and inspection 10 cm or 20 cm
£ 0.25In Stock -
6.4 mm Black Heatshrink, 20cm
6.4 mm (1/4") diameter unshrunk 2:1 shrink ratio Black 20 cm length Shrink temperature 70°C to 110°C Suitable for covering our Mic Cable 4.6 mm: Black and Grey
£ 0.35In Stock -
Grip-seal bag. 125mm x 200mm
Grip Seal Self Seal Plastic Bag Resealable and reusable Size: 125mm x 200mm Sufficiently stores A5 sized paper 300 gauge / 75 micron Made from strong clear polythene Secure resealable seal that will stay firmly closed until opening is required Not suitable for food storage
£ 0.20In Stock -
9.5 mm Black Heatshrink, 20 cm
9.5 mm Black Heatshrink, 20 cm Ideal for DIY Sleeve Diameter 9.5mm (3/8") Shrunk Diameter 4.8mm Colour Black Sleeve Type Heat Shrink Adhesive Lined No Shrink Ratio 2:1 Material Polyolefin
£ 0.40In Stock -
Neutrik Female XLR NC3FXX-B
Industry standard quality female XLR, the type that would be used with a professional microphone. Black metal housing, gold plated contacts. Black Male XLR, Silver Male XLR Silver Female XLR are available.
£ 4.95In Stock -
Rycote DIY Kit Wimbledon Green, short fur
Kit Includes: Rycote Green Mini Windjammer Fur Rycote Red Lining Velcro strips Made in the UK Dark grey fur and Black fur are also available. Size: Fur and lining 18.5 cm x 27.5 cm Velcro 2.0 cm x 12.5 cm
£ 11.40In Stock -
Rycote Clippy Lyre Holder (single)
Suitable for DIY A holder for the Clippy microphone 3 mm 1/8" mounting hole Made from almost indestructible thermoplastic Made by Rycote in the UK FC155 & FC156 are available Available with or without a Screw Kit consisting of: 1 x Black, 16mm M3 Hex Head Screw 1 x Plain Washer 1 x M3 Nyloc locking nut
£ 3.95In Stock -
Screened Stereo cable with 3.5 mm plug, 1.8 m
Stereo Figure of 8 cable 3.5mm moulded, gold plated, stereo plug Left and right cores individually screened Flexible and easy to work with Cable length: 1.8 metres. Used for FC044, FC129 and FC082 DIY Kits is available. No need to solder cable and plug.
£ 4.00In Stock -
DIY Stereo Microphone Kit of Parts with...
No need to solder plug and cable like DIY Kit with Neutrik plug DIY Kit includes: A pair of Primo EM272-Z1 or EM264 capsules Figure of Eight Cable length 1.8 metres with 3.5mm straight plug 10 cm of Black, 1.6mm Heatshrink Sleeving to cover exposed wire Lead free solder wire is available
£ 33.00In Stock -
Additional payment for Postage
Please note: Use this service only under our instructions.Please enter the amount in pence1 GBP = 100 pence For example if you need to pay 1.23 GBP type 123 in the Quantity box
£ 0.01In Stock -
Sleeve Holder for 10mm Microphone Capsule...
PVC Sleeve Holder for 10 mm microphone capsules. Suitable for 10 mm microphone capsules eg: Primo EM272, EM273, EM182, EM283, EM264Y
£ 1.00In Stock -
Neutrik Male XLR NC3MXX
Industry standard quality male XLR plug, the type that would feed audio into a recorder or sound mixer. Nickel housing, silver contacts. Altenatively FC028 Black Male XLR is available.
£ 3.40In Stock -
Primo EM272Z1 Omni module, Stereo with...
Complete working microphone ready to plug in No soldering required. DIY kit is available Ideal for binaural use Does require capsule and cable to be supported Sensitivity matched Primo EM272Z1 Metal bodied, gold plated, stereo plug Also Mogami 2368 version is available
£ 42.95In Stock -
Primo EM258 Mono module, with 3.5mm plug,...
A tiny (6 mm dia) high quality Primo EM258 capsule, wired as a complete working microphone module, ready to build into a housing or enclosure. Requires capsule and cable to be supported. These rubber holders fit the capsule: Primo 6mm holder and 6 mm Microphone Holder Good ultrasonic response Can be used with Rode VXLR+ Primo EM258 Data Sheet
£ 17.40In Stock -
Stereo EM272Z1 Omni module, 1.5m Mogami...
A matched pair of Primo EM272Z1 capsules 1.5 metre screened cable of thin flexible Mogami 2368 to each mic. Metal bodied, gold plated, Neutrik Right Angle Plug Figure of 8 version is available Primo EM272Z1 Data Sheet
£ 54.30In Stock -
Primo Omini module, Mono with 3.5mm plug, 1 m
Primo EM172 to Nickel plated 3.5mm plug with 1 metre cable Primo EM272Z-1 to Gold Plated 3.5 mm plug with 1.5m cable Requires capsule and cable to be supported : FC013, FC014. and FC032 are available Can be used with Rode VXLR+ Single microphone to be used with TRRS cable or Y adapter Ready to plug in, no soldering Primo EM272Z1 datasheet Primo EM172-Z1...
£ 19.30In Stock
